Designing a Tent
Tents, rooms and upper floors are all designed in the Explorers Crafting Table. Right-click any of its 3 parts to open it.
The screen
- The design grid on the left is 15x15 (225 slots). Each slot holds 1 item.
- Allowed items: panels (wool, wood and Block Panels), vanilla doors, Add-on Doors, Ladder Add-ons and floor blocks (any wool, any planks, or any full block that a Block Panel can be made from).
- Once the design is valid, the cells inside the outline turn green.
- Shift-clicking from your inventory does not fill the grid: place pieces one by one.
- The result slot (top right) shows the Explorers Tent, Room Add-on or Upper Floor Add-on when the design is valid. Taking it uses up every item in the grid. Shift-click it to move it to your inventory.
- The status text under the result slot gives a hint, says when the design is ready, or explains what's wrong.
- Closing the screen gives back everything left in the grid.
Picture to add: the design grid with a panel outline, a door and a floor, the enclosed cells tinted green
What you can make
- Explorers Tent: panels in an outline, exactly 1 vanilla door on the outer edge, and full blocks inside for a floor if you like.
- Room Add-on: the same, but with an Add-on Door instead of the vanilla door.
- Upper Floor Add-on: panels in an outline with exactly 1 Ladder Add-on inside it and no door, plus a floor if you like.
How the grid becomes a tent
- The tent's floor is every panel cell, the door cell, and every empty or floor-block cell enclosed by them. Enclosed means the outside can't reach it through empty cells, moving sideways only.
- The walls stand in the blocks just outside that floor. A full ring of panels around the whole grid gives a 15x15 floor.
- Each part of the wall and roof takes its material from its own panel, or from the nearest panel, so each roof face matches the wall below it.
- Floor blocks in enclosed cells become the floor. The outline cells take the floor block of the nearest floored cell, so the corners are floored too.
Editing a design
With the grid and the result slot both empty, put an empty Explorers Tent or Room Add-on into the result slot. It comes apart into its pieces in the grid (panels, door, Ladder Add-on and floor blocks), so you can change it. A tent or room only counts as empty if nothing is packed inside it and no windows, rooms, doors or hatches have been added.
Messages
While the design is valid, the status text says:
- Tent ready: N floor blocks, walls 4 high.
- Room add-on ready: N floor blocks, walls 4 high.
- Upper floor ready (N blocks). Use it on a flat roof: the ladder goes where you click.
If something is wrong, it says what, checked in this order:
| Problem | Message |
| No panels | Add panels (wool, wood or Block Panels) to outline the tent. |
| No door | Add a door to the outline. |
| More than one door (vanilla and Add-on Doors together) | A tent can only have one door. |
| A floor block outside the outline | Floor blocks must be inside the tent's outline. |
| The door isn't on the outside | The door must be on the outer edge of the tent. |
| The door is at an inside corner | The door needs a straight stretch of wall; move it away from the inside corner. |
| The panels are in more than one piece | All panels must join into one tent. |
| Upper floor: a door in the grid | An upper floor uses its Ladder Add-on instead of a door. |
| Upper floor: more than 1 Ladder Add-on | Use only one Ladder Add-on. |
| Upper floor: the Ladder Add-on isn't enclosed | The Ladder Add-on must be inside the outline. |
If the door touches the outside on more than one side, it faces out in this order of preference: south, east, west, north.
Last updated November 11, 2026